Close
Søke

Manley Massive Passive Mastering Version

Produsent: MANLEY
SKU: 706241
kr 87 495,00 inkl MVA
Rør-equaliser for ultrakritisk miksing- og masteringbruk
0 Nettlager inkl. Butikker
Leverandørlager - Ukjent status
+ -
A Mastering Version of the Acclaimed Massive Passive!
The Manley Massive Passive Mastering Version equalizer features a simple, passive design - not a standard parametric design - for more natural, organic shaping. It also offers mechanically detented knobs for both Gain and Bandwidth controls, so you can easily repeat your settings. On the Massive Passive Mastering Version, both the Gain and Bandwidth controls intentionally interact, and the bands interact, as well - this creates an incredible-sounding result without sounding "colored" or "processed." Also, both higher and lower than the normal version, the Manley Massive Passive Mastering Version's filters are tailored to mastering purposes.

Premium design with passive components
As you can expect from Manley, no corners were cut with the design of the Massive Passive Mastering Version, and there's no unnecessarily complicated circuit - Massive Passive Mastering Version features basic passive components and uses only metal film resistors, film capacitors, and hand-wound inductors to sculpt the sound.

Mechanically detented knobs
Your settings are completely loggable on the Manley Massive Passive Mastering Version. Manley found a way to mechanically detent the Gain and Bandwidth controls, ensuring repeatability - without adding the extra cost and space problems that Grayhill switches would have caused.

Gain and Bandwidth controls interact, as do the bands
On the Manley Massive Passive Mastering Version, both Gain and Bandwidth controls intentionally interact, as do the parallel-design bands. You can boost a band 20dB while boosting another band at that frequency for minimal change - on most equalizers, the two bands add - so you boost 40dB into clipping. Due to this interaction, predictable step sizes are unrealistic - but the settings are repeatable when logged - and the interact bands contribute to the Massive Passive Mastering Version's excellent sound.

Specially tweaked for mastering
The Manley Massive Passive Mastering Version is tailored to mastering needs. Its filters are both higher and lower than the regular Massive Passive. In addition, the Master Gain Trim Controls are true 11-position, 1/2dB, stepped Grayhill switches ranging between -2.5 to +2.5dB of trim, making left/right matching and calibration easier.

Features:

All-Passive tone sculpting circuitry
Unique Shelf curves use the "bandwidth" control
Overlapping and Interleaved Frequency choices
Every band switchable to shelf or bell
Vacuum tube make-up gain and line drivers
Parallel symmetrical topology
Premium components throughout
HP and LP Filters plus gain trims
Ins & Outs Balanced XLR & 1/4" (accepts unbalanced)
Level +4 dBu nominal, internal switches for -10 operation
Bypass Switch bypasses EQ & tube circuits (not hardwire)
44 Frequencies (roughly 1/4 octave spacing)
Frequency Range: 22 Hz to 27 Khz
EQ Boost/Cut Range : Maximum 11dB boost or cut
Nominal Q range: 1.5 to 3 (uniquely active in shelf modes)
Frequency Response: +/- 2 dB: 8 Hz to 60 KHz
Maximum Output @ 1.5% THD +37 dBv; +26dBv @ 20 Hz
THD & Noise (1KHz @ +4 dBu): 0.06%
Noise Floor (referred to +4dBu): -85 dB (A Weight)
Dynamic Range: 120 dB
Tube Complement: 2 x 12AU7, 4 x 6414
Power Consumption (120/240VAC): 72 watts
Mains Voltage Frequency: 50~ 60Hz
Size (3U): 19" x 5.25" x 10"
Weight: Unit 21 lbs.


 

Spec:


Ins & Outs Balanced XLR & 1/4" (accepts unbalanced)
Level +4 dBu nominal, internal switches for -10 operation
HARDWIRE Bypass Switch (unit does pass audio when powered off)
44 Frequencies (roughly 1/4 octave spacing)
Frequency Range: 22 Hz to 27 kHz
EQ Boost/Cut Range: Maximum 11dB boost or cut
Nominal Q range: 1.5 to 3 (uniquely active in shelf modes)
Frequency Response: ±2 dB: 8 Hz to 60 KHz
Maximum Output @ 1.5% THD +37 dBv; +26dBv @ 20 Hz
THD & Noise (1KHz @ +4 dBu): 0.06%
Noise Floor (referred to +4dBu): -85 dB (A Weight)
Dynamic Range: 120 dB
Tube Complement: 2 x 12AU7, 4 x 6414
Power Consumption (120/240VAC): 72 watts
Unit is factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
Operating Mains Voltage changeable with power transformer changeover switch and fuse value change.
Mains Voltage Frequency: 50~ 60Hz
Size (3U): 19" x 5.25" x 10"
Weight: Unit 21 lbs. Shipping Weight: 27 lbs.